Sullivantown Rd Walkertown, NC 27051

PB Pedestrian Business District (1) Purpose. .....The PB District is primarily intended to accommodate office, retail, service, institutional and high density residential uses which customarily serve community and convenience business needs of smaller communities and urban nodes in the city and county. The district is intended to encourage the development of attractive, identifiable small towns, and to accommodate the pattern of building in the business concentrations surrounding the central core of Winston-Salem, and the central core of other municipalities in the County. The district should demonstrate pedestrian oriented design through elements such as buildings pulled up to the street, on-street parking, street trees, covered arcades, awnings, storefront display windows, public/private outdoor spaces, wide sidewalks, and building entrances facing the street. This district is intended for application in GMAs 1, 2 and 3. (2) General Dimensional Requirements - PB. Zoning District Minimum Zoning Lot Minimum Contiguous Site Area (ac) Minimum Setbacks 1,2 Maximum Impervious Surface Cover (%) Maximum Height (ft) 2 Side Area (sf) Width (ft) Front (ft) Rear (ft) Interior Side (ft) Street (ft) PB - - - - - - - - 60 1. Whenever a lot in a nonresidential district other than the NB or NO Districts shares a common boundary line with a lot in a residential district (except RM-U), YR, AG, or H District with no intervening street or highway, the lot in the nonresidential district shall have a required setback along the shared boundary line of not less than forty (40) feet or shall have the required setback for the nonresidential district, whichever is greater. 2. Whenever a residential use in the PB Zoning District shares a side yard boundary line with a lot in a residential district, the requirements of Section B.3-1.2(J)(2) shall apply (3) Supplementary District Standards. (a) Parking. See Section B.3-3.5(D)(1). (b) Screening Mechanical Equipment. All on-site mechanical equipment shall be screened in accordance with Section B.3-4.5(B) (c) Within GMA 1. (i) General Dimensional Requirements. Except as specified in this section, there are no general dimensional requirements for the PB District within GMA 1, provided that each additional foot of height in excess of sixty (60) feet shall be set back a minimum of four (4) feet from properties zoned RS, RSQ, or H. A minimum fort (40) foot setback from any residential district (except RMU) shall be required in accordance with Section B.3-1.2(J).