476 Edwards Ave Shelley, ID 83274-5085
establishing the R2-A Residence Zone is to designate appropriate areas within t he City where the residential density is limited to eight (8) attached dwelling units on any given lot. Each R-2A zone shall contain no more than five (5.0) acres, and at least fifty percent (50%) of the dwelling units in the zone shall face a street with properties zoned R1, R-1…
Cap rate
Implied · in-place · derived from last sale + estimated NOIValue
AI, CAP & Alternative Use estimations · Realmo proprietary blendProperty tax & assessments
Tax year 2024Comparables
6 recent transactions · within 1.5 miComparable in this City
Similar Nearby for Sale
Similar Nearby for Lease
Property description
Physical attributes from public recordsZoning & alternative use
R2 · Shelley, IDestablishing the R2-A Residence Zone is to designate appropriate areas within t he City where the residential density is limited to eight (8) attached dwelling units on any given lot. Each R-2A zone shall contain no more than five (5.0) acres, and at least fifty percent (50%) of the dwelling units in the zone shall face a street with properties zoned R1, R-1A, or R-2A on the other side of the street. In order to accomplish the objectives and purposes of this ordinance and to promote the essential characteristics of this zone, the following regulations shall apply in the R2 -A Residence Zone. 10-9B-2: USE REQUIREMENTS: Any use permitted in R1 and R1-A zones shall be permitted in the R2-A Residence Zone. 10-9B-3: AREA REQUIREMENTS: For detached dwellings, the minimum requirements of the R-1 zone as specified in 10-8-2 apply. For buildings containing two (2) dwelling units the minimum requirements of the R1-A zone as specified in 10-9A-3 apply. For buildings containing three (3) to eight (8) dwelling units, an area of not less than fourteen thousand (14,000) square feet, plus an additional three thousand (3,000) square feet for dwelling unit for each dwelling unit above three (3) shall be required. 10-9B-4: WIDTH REQUIREMENTS: The minimum width of any building site or residential building lot for each building containing one (1) dwe lling unit shall be as specified in 10-8-2. The minimum width of any building site or residential building lot for each building containing C:\Users\Owner\Desktop\Copy of City Codes-Word\10-9B.doc two (2) dwelling units shall be as specified in 10-9A-3. The minimum width of any building site or residential building lot for each building containing three (3) to eight (8) units shall be sixty (60) feet in width with a minimum of twenty-four (24) feet in width per unit measured at the building setback line. 10-9B-5: LOCATION OF BUILDINGS AND STRUCTURES: (A) Setback. All buildings shall be set back a minimum distance of thirty (30) feet from the property line adjacent to any public street or from any granted easement or vehicular access, except as herein provided as required under the provisions of this ordinance. No auxiliary building shall be located closer to the street (or granted easement of vehicular access) fronted by the main building than the distance of the main building to the street (or granted easement of vehicular access). (B) Side Yard.
Costs & Benchmarks
Operating expenses, capex projections, utility benchmarks, and submarket comparables — all in one view.
Risks
Flood, climate, environmental, title, and tenant-concentration risk — surfaced with mitigations and source citations.